|
|
Post by aerobat150k on Aug 26, 2020 18:25:58 GMT
Anyone have pictures of how the rudder pedal cable attaches to the aluminum piece on the track? I need to make new cables for my Rave but can't find how to crimp the eyes on. I think the WR17 doesn't have eyes on both sides like the Rave does, but it's the same rudder pedal system.
|
|
bill
New Member
Posts: 13
|
Post by bill on Sept 6, 2020 14:54:03 GMT
We replace our steering cables with nylon stainless cables from Home Depot and the swag eye ends from Amazon (5 PC 1/8'' Wire Rope Swage Eye Terminal Hand Aircraft Eye Stainless Steel) www.amazon.com/gp/product/B00PT9UX9K/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1If I remember correctly there was a pin that we were able to attach it to on the foot peg. The hard part was crimping the eyes well enough to hold. Hope this helps. Bill |
|
|
|
Post by aerobat150k on Sept 8, 2020 18:14:18 GMT
I ended up just buying a premade one from McMaster Carr. The only downside was that since it was already crimped on, I had to drill a larger hole through the hull and file down the side of the pulley. To minimize this I ground the eye down to the same size as the one currently installed. It should outlast the rest of the boat!
|
|
