Post by Richard Isaac Ceballos on Apr 30, 2021 14:15:18 GMT
I made a shelf for the port side front cockpit.
4" PVC, 40" long, thin wall with 2 end caps. (end caps are circular pvc glued with JB Weld).
Has opening large enough to squeeze stuff in.
Has 1/4" drain holes on bottom.
Mount the shelves with two small SS bolts at each end (bolt down through the gunnels).
I also made one for the stbd side, with sliding doors to keep rain out.
Here are both sides finished.
rceballos1937@gmail.com