billb
New Member
Posts: 7
|
Post by billb on May 21, 2021 0:20:32 GMT
SET UP GUIDE in Process. Notes from Richard to Billb May 19 2021
The mast raising instructions are for WR17s that have had the trailer winch mast raising modification installed. Find instructions in this Forum. Helpful if rigging solo for raising and lowering
MAST RAISING Untie Lines Pull Armas out and Lock Connect Jib to Mast Top Clear the Shroud Lines Slide the Mast to it's Ball Connect Winch Strap to the Halyard Raise the Mast When raising or lowering the mast be sure to rotate the mast to a side, to prevent mast base binding. Connect the Jib to it's Furler Remove the Winch Strap from the Halyard Connect Jib Sheet Defenders Move the Halyard behind Shroud & Secure (To Bungee) Remove the Rear Mast Support Note: The Mainsail is stored on deck until ready to raise
MAINSAIL PREP Remove Mainsail Cover Set the Gooseneck in the Mast Track Release the Halyard from the Horn Cleat Connect the Halyard to the Mainsail Head Remove the Sail Ties Raise the Mainsail Head 6" into the Sail Track and Lock the Halyard on Mast Horn Cleat Connect the Mainsheet to the Boom
JIB PREP (On the Trailer) Pull the Furling Line to Empty the Furl Spool and Lock Direct the Furling Lines to respective Cam Cleats Leave Jib Furled
JIB DEPLOY (On The Water) Unlock the Furl Line Pull the respective Jib Sheet to Trim & Lock
MAINSAIL RAISING (On The Water) Head the Boat into the Wind Raise the Mainsail and Lock the Halyard Attach the Rotation Limiter Adjust the Mailsail for Sail Trim
These may be updated and adjusted, Happy sailing !
VIDEO link below
|
|